Sneakers Paint – Mixing Colors
Tarrago Sneakers Paint is a water-based color dye specially formulated to change the color, customize or restore your smooth leather, synthetic leather or canvas sneakers.
Tarrago Sneakers Paint is a water-based color dye specially formulated to change the color, customize or restore your smooth leather, synthetic leather or canvas sneakers. Thanks to its high concentration of high-quality pigments, it has a high hiding power. It offers a high resistance to wet/dry friction and flexions, preventing the dye from cracking. Satin / Matt finish.
- The box contains a 25ml. / 0.9 fl. oz. color bottle, a paint brush, an applicator sponge, a dossing cap and a leaflet.
- As a water-based formula, it is not considered a hazardous product for the consumer or the environment.
- Presentation in 125ml /4,40 fl.oz too.
Product data sheet 25ml
Product data sheet 125ml
Safety data sheet
There is a wide range of colors and are divided in these following groups:
How to use
2. Before painting, stir the content with the brush enclosed, until a homogeneous color is obtained.
3. Customize your Kicks:
3.1. Use the Sponge included to cover larger surfaces. With the semi-wringing Paint brush, paint one corner of the sponge and gently rub over with circular moves on the Sneakers.
3.2. Use the Paint Brush included for small details or customization.
3.3. Use an Airbrush, see the instructions inside airbrush box. Use the neutral base, to dilute the dye and maintain its properties.
The applications must be very light. It is better to apply several thin layers than a single thick layer. After drying the first layer of paint (1-3 minutes), apply a second layer if it is necessary, repeating the operation to match the entire color.
To accelerate the dyeing process between layers, use a hair dryer with caution (30 cm. minimum distance).
IMPORTANT FOR FLUOR AND METALLIC COLORS:?Apply the Sneakers Paint no.1 (white color) previously to achieve a better result.
4. For optimum drying, let it dry for 12 hours.
5. Once the process is finished, wash the Sponge, the Paint Brush or the Airbrush with water to prevent them from drying out.
Get your color
Sneakers paint can be mixed between them by using the included dossing cap to achieve the desired tone.
Orange: 2 parts yellow and 1 part magenta.
Violet: 2 parts magenta and 1 part cyan.
Green: 2 parts cyan and 1 part yellow.
You haven’t found the exact color you are looking for?
With the mix of our sneakers paint “mixing color” you can achieve a range of colors of the pantone chart.
Reasons to choose Tarrago Sneakers Paint
Resistance to friction
The most resistant to friction on humid conditions.
Resistance to flexion
Resists more than 10.000 flexions.
The best coverage power, less layers to achieve a better coverage.
Dries really fast between 1 and 3 minutes.
Offers a matt finish.
The most viscous; less time to prepare paint and mixtures.